Announcement

Collapse
No announcement yet.

Matrox O´cing with Powerstrip

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Matrox O´cing with Powerstrip

    I had a Parhelia Bulk that could be overclocked sucessfully with Powerstrip 3.30 (=PS), but the oc-potential was quite limited.
    Now i bought a Retail version with more potential but there are two problems now:

    1. The default clock of the Parhelia Retail is 200 /500 Mhz according to PS. That would not be matter without problem 2.

    2. If a overclock/underlclock the card the lower quarter part of the display will flicker irregular / unperiodical.
    There is no instability but the disturbing flickering.
    I reinstalled the drivers and PS but both problems are still
    present.

    Does someone have the same problem or a solution?
    Matrox rox, S3 sucks!
    Attention:
    I am watching you!

  • #2
    That isn't a P Retail you have there, Retail clocks are 220/550

    Comment


    • #3
      Update to a newer build of PS...
      Let us return to the moon, to stay!!!

      Comment


      • #4
        Your PS could be corrupted... it happened to me (but whole screen flickers).
        Hold down Ctrl before starting PS, it will reset everything to default.
        Worked for me!
        P4 Northwood 1.8GHz@2.7GHz 1.65V Albatron PX845PEV Pro
        Running two Dell 2005FPW 20" Widescreen LCD
        And of course, Matrox Parhelia | My Matrox histroy: Mill-I, Mill-II, Mystique, G400, Parhelia

        Comment

        Working...
        X