Announcement

Collapse
No announcement yet.

Voltages for CU-Mine's?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Voltages for CU-Mine's?

    Anyone know aht the default volatage and Vcore voltage is for a Coppermine 500e, as i need to make sure my IwillSlocket2 is configured properly
    A-Trend Mobo 6240 V2
    Custom Heatsink/Globalwinfan setup
    128MB/PC133/PC100 Combo
    I-Will Slocket2
    PIII Coppermine 500e@690 FSB 138
    Windows98SE
    Matrox G400 32 D/H (Latest drivers)
    Soundblaster 1024 Live @3.0 drivers
    8.4 West Dig (ATA 33)
    6.4 Fugitsu (ATA 66)
    MS Intell/Explorer USB
    Pioneer 6/32x DVD
    Memorex 48X CD
    Altec lansing Sub + 2 satelite speakers

    Golden Orb (www.plycon.com) being installed soon


    Old Joes's Going for IT!!!

  • #2
    1.60 Volts for FC-PGA and 1.65 Volts for SECC2 (Slot-1) ...
    Despite my nickname causing confusion, I am not female ...

    ASRock Fatal1ty X79 Professional
    Intel Core i7-3930K@4.3GHz
    be quiet! Dark Rock Pro 2
    4x 8GB G.Skill TridentX PC3-19200U@CR1
    2x MSI N670GTX PE OC (SLI)
    OCZ Vertex 4 256GB
    4x2TB Seagate Barracuda Green 5900.3 (2x4TB RAID0)
    Super Flower Golden Green Modular 800W
    Nanoxia Deep Silence 1
    LG BH10LS38
    LG DM2752D 27" 3D

    Comment


    • #3
      Markus is correct, as usual

      Comment


      • #4
        Right

        My pin setting on my I-Will Slocket are as follows, as suggested by the I-Will web page. Thanks RoGuE for the link

        Jumper 6.7.8,9 covering jumper 1 & 2
        Jumper 1,2,3 covering Jumper 2 & 3
        Jumper 4 no jumper
        Jumper 5 covering 2 & 3

        is this right?
        A-Trend Mobo 6240 V2
        Custom Heatsink/Globalwinfan setup
        128MB/PC133/PC100 Combo
        I-Will Slocket2
        PIII Coppermine 500e@690 FSB 138
        Windows98SE
        Matrox G400 32 D/H (Latest drivers)
        Soundblaster 1024 Live @3.0 drivers
        8.4 West Dig (ATA 33)
        6.4 Fugitsu (ATA 66)
        MS Intell/Explorer USB
        Pioneer 6/32x DVD
        Memorex 48X CD
        Altec lansing Sub + 2 satelite speakers

        Golden Orb (www.plycon.com) being installed soon


        Old Joes's Going for IT!!!

        Comment


        • #5
          JoeDredd
          You are showing JP8 as 1-2 that is for a PPGA aka. Celeron!!!

          for a Flip Chip JP8 should be pins 2-3

          For an Intel JP9 1-2

          You have the FSB setting as AUTO (JP6and7 pins 1-2)

          Your VCore is shown as 1.65. You probably don't need that much. Try the default voltage of 1.60 first. Change JP1 to OFF. or use the AUTO setting if your MoBo is cabable of adjusting for CuMines. That would be JP1,2,3,4,and5 set to OFF. The documentation shows this as no CPU but it's wrong (or atleast incomplete). That's how I have mine set and VCore is set by the MoBO (but I can't adjusted VCore with my MoBo, oh well my be the next one, but it's stable at 133FSB with 1.6 Volts).

          Mark F.

          ------------------
          OH NO, my retractable cup holder swallowed a CD



          [This message has been edited by Mark F (edited 08 February 2000).]
          Mark F. (A+, Network+, & CCNA)
          --------------------------------------------------
          OH NO, my retractable cup holder swallowed a DVD...
          and burped out a movie

          Comment


          • #7
            My pin settings are now

            Jumper 6&7 1&2 covered
            Jumper 8 2&3 covered
            Jumper 9 1&2 covered
            Jumper 1 off
            Jumper 2&3 2&3 covered
            Jumper 4 off
            Jumper 5 2&3 covered

            is this right?

            My mobo sorts the vcore for me
            A-Trend Mobo 6240 V2
            Custom Heatsink/Globalwinfan setup
            128MB/PC133/PC100 Combo
            I-Will Slocket2
            PIII Coppermine 500e@690 FSB 138
            Windows98SE
            Matrox G400 32 D/H (Latest drivers)
            Soundblaster 1024 Live @3.0 drivers
            8.4 West Dig (ATA 33)
            6.4 Fugitsu (ATA 66)
            MS Intell/Explorer USB
            Pioneer 6/32x DVD
            Memorex 48X CD
            Altec lansing Sub + 2 satelite speakers

            Golden Orb (www.plycon.com) being installed soon


            Old Joes's Going for IT!!!

            Comment


            • #8
              Yes
              That is forceing 1.60 VCore on the IWill.
              The rest is fine also.
              You said your MoBO sorts the vcore for you, then you could leave jumpers 1 through 5 OFF.
              But either should work!
              Hope I didn't muddy the water, with too much extra info.

              Let us know how it runs,
              Mark F.

              ------------------
              OH NO, my retractable cup holder swallowed a CD

              Mark F. (A+, Network+, & CCNA)
              --------------------------------------------------
              OH NO, my retractable cup holder swallowed a DVD...
              and burped out a movie

              Comment


              • #9
                Thanks Everyone

                I will let u know how it goes

                Joe
                A-Trend Mobo 6240 V2
                Custom Heatsink/Globalwinfan setup
                128MB/PC133/PC100 Combo
                I-Will Slocket2
                PIII Coppermine 500e@690 FSB 138
                Windows98SE
                Matrox G400 32 D/H (Latest drivers)
                Soundblaster 1024 Live @3.0 drivers
                8.4 West Dig (ATA 33)
                6.4 Fugitsu (ATA 66)
                MS Intell/Explorer USB
                Pioneer 6/32x DVD
                Memorex 48X CD
                Altec lansing Sub + 2 satelite speakers

                Golden Orb (www.plycon.com) being installed soon


                Old Joes's Going for IT!!!

                Comment

                Working...
                X