Announcement

Collapse
No announcement yet.

PPGA Celly 366 overclock...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • PPGA Celly 366 overclock...

    Can anyone help with this...
    I just bought Abit Bx6 rev.2 and Powerleap II PPGA slot 1 adapter with PPGA Celeron 366 and one heatsink with fan (Megacool). I tried to overclock it to 550 Mhz, but it only works fine with 458 Mhz (with 83 Mhz bus speed). If I increase the bus speed to 100 Mhz I can start windoze but when I start any application it halts after some time. Hardware doctor says that cpu is running 2.14 V and 42 degrees. I tried to raise the voltage to 2.3 but no effect it always halts after a short (maybe 2 minutes) use. Is there anything more I can try?


    ------------------
    -Nixu-
    Nixu
    MGA G400 Dh 32Mb, Cel 366@458, BX6 r2

  • #2
    Chances are you got a 366 that won't do 550. Some of them just won't do it. That's why it's good to get a pre-tested one that many on-line stores sell - or even on Ebay. I bought two pre-tested for around $100 and both do 550 at 2.1v. Sorry I can't be of more help, but maybe you should sell it and get a tested 366.
    Vanilla G400 DH (5.25 and beta ICD), Celeron 366 o/c 550 mhz, BE6, 128 megs cas2 PC100, IBM 22 gig 66 udma, SB Live, Kenwood 52x, Viewsonic P810, Win98SE

    Comment


    • #3
      Chances are you got a 366 that won't do 550. Some of them just won't do it. That's why it's good to get a pre-tested one that many on-line stores sell - or even on Ebay. I bought two pre-tested for around $100 and both do 550 at 2.1v. Sorry I can't be of more help, but maybe you should sell it and get a tested 366.

      That was $100 for each 366 not $100 for both.
      Vanilla G400 DH (5.25 and beta ICD), Celeron 366 o/c 550 mhz, BE6, 128 megs cas2 PC100, IBM 22 gig 66 udma, SB Live, Kenwood 52x, Viewsonic P810, Win98SE

      Comment


      • #4
        one question.

        did you rember to set the pci/agp buss to 2/3 rather than 1/1 ??????? when you upped your system to 100mhz fsb?

        ------------------
        If any message I have posted in the past, present or future has upset or caused someone bad feelings, Im sorry. I only meant those remarks in jest, once again I am sorry. I have a warped sence of humor. (Unless your name is Tylau of course then You can eat shit and Die Die Die you ****ole.)

        Noel C. Ridge Jr.

        i never said i could spell, hey do we have a spell checker option that can be turned on ???


        msi 6167 mobo k7 500 wk41 now at 650. 256 meg ram ,addtronics case w 250watt sp power supply, matrox g400, maxtor diammax 2500+ 10gig hd,10x aopen slot dvd, 3com 10/100 nic, sb live xgamer sound card, efecent networks dsl modem, dlink 701i dsl router/firewall, lots of controlers (joystick throttle rudder raceing wheel), 19in ctx monitor, logitech mouseman wheel usb, and klipsch promedia v2-400 speakers. win98 oem and win2k pro dual boot.

        noel
        it's times like this that make me think of my fathers last words....

        Don't son that gun is loaded.

        Comment


        • #5
          If i remember correctly Abit's bios does set it to 2/3 automatically. But I have to check that out, thanks...
          Nixu
          MGA G400 Dh 32Mb, Cel 366@458, BX6 r2

          Comment


          • #6
            add more fans and even better a 2nd heatsink on the backplate ...

            ------------------
            Cheerio,
            Maggi

            Asus P2B-S @ 112MHz FSB - Bios 1010 final
            Celeron300A @ 504Mhz
            128MB 7ns SDRAM
            G400 DualHead 32MB SGRAM @ 201 MHz memory clock
            Despite my nickname causing confusion, I am not female ...

            ASRock Fatal1ty X79 Professional
            Intel Core i7-3930K@4.3GHz
            be quiet! Dark Rock Pro 2
            4x 8GB G.Skill TridentX PC3-19200U@CR1
            2x MSI N670GTX PE OC (SLI)
            OCZ Vertex 4 256GB
            4x2TB Seagate Barracuda Green 5900.3 (2x4TB RAID0)
            Super Flower Golden Green Modular 800W
            Nanoxia Deep Silence 1
            LG BH10LS38
            LG DM2752D 27" 3D

            Comment


            • #7
              yep i dose set it automaticly if you use defualt auto setup.

              but my bh6 when useing manule (so you can over clock you have to set it manuley.


              ------------------
              eck...... a mouse, run its a mouse, its going to infect you with a nasty cheese fetish.
              msi 6167 mobo k7 500 wk41 now at 650. 256 meg ram ,addtronics case w 250watt sp power supply, matrox g400, maxtor diammax 2500+ 10gig hd,10x aopen slot dvd, 3com 10/100 nic, sb live xgamer sound card, efecent networks dsl modem, dlink 701i dsl router/firewall, lots of controlers (joystick throttle rudder raceing wheel), 19in ctx monitor, logitech mouseman wheel usb, and klipsch promedia v2-400 speakers. win98 oem and win2k pro dual boot.

              noel
              it's times like this that make me think of my fathers last words....

              Don't son that gun is loaded.

              Comment

              Working...
              X