Announcement

Collapse
No announcement yet.

Pin B21

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pin B21

    Any suggestions on the best/easiest way to "tape" pin B21. That's 11 pins from the right on the hologram side right? Oh and while your here why not throw in your experiences with overclocking PII systems especially PII 350s.

  • #2
    Any similar tricks for a p2450 with an
    uncooperative mobo?

    Comment


    • #3
      Ok, first look under the processor, where the pins are. One side holds all the "A" pins, and the other holds the "B" pins. Starting from B1, count off 21pins and tape the twenty-first pin. Make sure the tape covers the entire B21 pin. Plug it back in and Voila!

      ------------------
      Pentium II 350mhz (@412 4*103...can anyone gimme a P3?) 256PC100 Ram, 8.4gig WD, Vanilla G400 32mb, Diamond MX300





      hi

      Comment


      • #4
        go to www.overclockers.com they have a good cpu database for results.

        oh i use an abit bh6 no tapeing needed and rock stable at 450
        ------------------
        i don't know what im going to bitch about now that the avp patch is out.
        p2 350 at 450, 196 meg pc100,10gig hard drive,5xdvd cl drive, xitel p. storm sound, 32meg g400 dualhead, acs 400 altec lansing speakers+yamaha rear, ch throttle, ch force fx, ch pedeals, hp laserjet 4, epson 400 color, ctx vl950 main mag dx17t secondary monitors
        other systems k6-2 350 and k6 200.
















        [This message has been edited by merchant2 (edited 07-29-99).]

        Comment


        • #5
          Yeah right. Go out and buy another MB, while your at it get a P3 600, I've heard they are faster...

          Work with what ya got, you'll be OK.

          -neo

          ------------------
          Asus P2B-F, 532MHZ Pentium II (4x133 at 2.4v), Global Win VEK12 hs/fan, 128MB Micron PC133, WD 7200RPM 18Gig, SB AWE 32, Creative DVD 2x, Mitsumi CDR 2x/8x, Sony Trinitron 17", Old Matrox Video Card, and a redhead with a pair of 36Cs (O/Ced to 38Cs)







          Comment


          • #6
            I have to say the bh6 does work nice especially when you use the L2 cache latency setting in the soft bios! (P3 ready also!!)
            jim

            ------------------
            P2-350 o/c 450, BH-6 mobo,128mb pc-100,Mill. G-200 8mb o/c to 215 with g200clk, win98,dx6.1,PD5.13, bios 2.3
            THREE BIG FANS (and three little ones)




            System 1:
            AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
            Epox 8K7A
            2x256mb Micron pc-2100 DDR
            an AGP port all warmed up and ready to be stuffed full of Parhelia II+
            SBLIVE 5.1
            Maxtor 40g 7,200 @ ATA-100
            IBM 40GB 7,200 @ ATA-100
            Pinnacle DV Plus firewire
            3Com Hardware Modem
            Teac 20/10/40 burner
            Antec 350w power supply in a Colorcase 303usb Stainless

            New system: Under development

            Comment

            Working...
            X