Announcement

Collapse
No announcement yet.

Troubleshooting help required. AGP P650

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Troubleshooting help required. AGP P650

    Here's what I have done
    put P650 into Gigabyte GA-7ZXR motherboard.
    Set the AGP voltage to 1.5v.
    Plugged in lcd to the DVI port of card.


    The motherboard has memory and a processor.
    But no signal is sent to the DVI. and the PC eventually does a double beep, followed by a pause then single beep.

    Any further ideas?

  • #2
    Check which BIOS your mobo uses, then search for PC POST codes to see what that pattern means. My guess is it's probably a memory error, so check that first.
    FT.

    Comment


    • #3
      The solution to this problem is simple.

      1. Get a static bag. Put the card in the static bag.

      2. Get a cardboard box. Put the card/bag into the box.

      3. Seal the box. Put my address on it.

      4. Take it to the post office. Send the box to me.

      That is all. This will completely solve your problem!
      The Internet - where men are men, women are men, and teenage girls are FBI agents!

      I'm the least you could do
      If only life were as easy as you
      I'm the least you could do, oh yeah
      If only life were as easy as you
      I would still get screwed

      Comment


      • #4
        LOL! Still on the hunt for Matrox card of your very own, eh?
        P.S. You've been Spanked!

        Comment


        • #5
          Yeah kinda. Not desperate enough to PAY for one - have you seen what those things go for on eBay?
          The Internet - where men are men, women are men, and teenage girls are FBI agents!

          I'm the least you could do
          If only life were as easy as you
          I'm the least you could do, oh yeah
          If only life were as easy as you
          I would still get screwed

          Comment

          Working...
          X