Announcement

Collapse
No announcement yet.

Modifying G400 OEM to work with i845 P4 mobo?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Modifying G400 OEM to work with i845 P4 mobo?

    I've seen reference to shorting the R68 pads on the non-OEM early model G400s, so that i845 P4 motherboards will properly recognize them as 1.5V-capable.

    Does anyone know where this modification can be done on the OEM 16MB G400 cards? It doesn't appear to be R68, since that's already populated with a resistor.

    Thanks for any pointers!

  • #2
    see if this helps,

    Comment


    • #3
      Thanks. I'd already searched the boards here and had come across that thread. It's discussing the non-OEM cards, which appear to be arranged/wired very differently from the OEM cards. Thus, the suggestion to bridge the R68 solder points doesn't seem to apply to my OEM card. There's probably a comparable connection somewhere on the card that I could connect in the same manner, but I don't know where...

      Comment

      Working...
      X