Tweet
Is there any difference in colour quality when using DVI connectors getween a GF3 Ti 200 and using a parhelia. Will I get a nicer picture using a parhelia?
-
______________________________
Nothing is impossible, some things are just unlikely. -
I don't think so.
AZ -
If it is a DVI CRT, the only benefit of the Parhelia would be gigacolor.....other than that...Let us return to the moon, to stay!!!Comment
-
Would Gigacolour even be an advantage? I mean, isn't 8bits per channel the best that LCDs do at the moment?DM says: Crunch with Matrox Users@ClimatePrediction.netComment
-
Remember, I said DVI CRT....Let us return to the moon, to stay!!!Comment
-
-
Parhelia does have VCQ2, so yes, Parhelia will have better looking colors.Gigabyte P35-DS3L with a Q6600, 2GB Kingston HyperX (after *3* bad pairs of Crucial Ballistix 1066), Galaxy 8800GT 512MB, SB X-Fi, some drives, and a Dell 2005fpw. Running WinXP.Comment
-
DVI CRTs were all just DVI-A CRTs, meaning they are analog and just use DVI-I instead of D-SUB plugs.
AZComment
-
I have no clue about all those different DVI types.
What kind of DVI connection did this monitor use?
Iiyama HA901DComment
-
I found it - it's no longer sold, though.
It actually uses DVI-D.
The different DVI flavours are:
DVI-D: Digital. This is the signaling flat panels use.
DVI-A: Analog. Just like D-SUB with a different plug. There are adaptors from DVI-A to D-SUB.
DVI-I: Integrated. The connectors for DVI-D and DVI-A are a bit different, physically (apart from delivering very different signals) - this is one connection standard that can transport both Analog and Digital signals, and fits everywhere. DVI-I is used more to describe the plug and connection, while DVI-D and -A are used to discern between Digital and Analog signaling. Most devices use DVI-I connectors.
AZComment
Comment