Announcement

Collapse
No announcement yet.

Need help tweaking my dualhead setup...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need help tweaking my dualhead setup...

    OK, this is what I've got hooked up to my G550:
    Samsung 170T 17" LCD connected to DVI
    Samsung 955DF 19" CRT connected to analog

    The result of my initial setup:
    My max res is capped at 2560x960...
    There is roughly a 100 pixels cut from the LCD display on the right side...
    There are black bars to the right, left and top of the LCD display, and if I expand to remove, the image looks like shit...
    And now I've noticed the bottom of the LCD display is cut by about 10 pixels.

    I'm totally disappointed, to say the least. I should get a full 2560x2048 with no black bars and no clipping.

    Can anyone advise on how to get a <i>proper</i> dualhead setup?

    eel
    Last edited by ravalox; 25 May 2002, 15:39.
    Waiting on tech support...

  • #2
    Now I'm running in 2048x768, and the LCD displays a proper full screen. Still, it looks like crap because it's not the native resolution of the monitor.

    The more I think about this, I believe this is a driver issue. It seems Matrox only counted on 1024x768 being the native res for most users, and didn't do much testing for 1280x1024 native res LCD's.

    ...and I'm running W2K.
    Last edited by ravalox; 25 May 2002, 15:51.
    Waiting on tech support...

    Comment


    • #3
      Ahhh, everything is right with the world...

      A driver re-install has resolved the problems. Cool. I like this.
      Waiting on tech support...

      Comment


      • #4
        lol the simple things always seem to work
        Dell Inspiron 8200
        Pentium4m 1.6
        640mb pc2100
        64mb gf440go
        15" uxga ultrasharp
        40gb 5400rpm hdd 16mb cache

        Comment


        • #5
          Originally posted by roadie
          lol the simple things always seem to work
          Until you reboot, that is. I still have the 2560x960 limitation when using the same res/refresh option, with a few other bugs thrown in for free. There is definitely a driver issue here, but I'll have to wait until the Matrox forums open next week.

          I'm able to get the correct res for the LCD when I use the separate res/refresh option, but the taskbar doesn't span both monitors. I also lose an option for multi-display, which I can't think of atm.

          I'm also disappointed that eDualHead only supports the devil's browser.
          Waiting on tech support...

          Comment

          Working...
          X