Announcement

Collapse
No announcement yet.

Jerky video-in with G400

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jerky video-in with G400

    Hi All!

    I have a rather strange problem that perhaps some of the experts here can shed some light on. I am starting to transfer some of my very old SciFi video tapes to DVD, but looking at the captures I have noticed quite a bit of "jerking" during medium to fast motion sequences. The jerking is more prevalent on vertical motion than on horizontal but it is present in both directions.

    At first I thought it was something happening during the capture since it does not jerk when played on a VCR, but it is present even if I just watch the tape through the G400-TV card. As a test, I recorded a clip off of TV and tried that on the G400 and it was fine. Apparently the "jerking" only manifests when using pre-recorded taoes. Any got any ideas?

    Thanks!

    Karen
    Intel Pentium 4-478 @ 2.0 GHz
    Gigabyte 8ITXR mainboard
    512 MB 400 MHz RAMBUS memory
    2xMaxtor 80 GB 7200 RPM in IDE
    2xMaxtor 40 GB 7200 RPM in RAID-0
    Matrox G450-eTV
    Win98SE & Win XP Pro
    Turtle Beach Santa Cruz
    Netgear FA311 10/100 NIC
    Panasonic LF-D311 DVD-RAM/R
    Canopus ADVC-100
Working...
X