Nero 5.5 Woes!

[dizzynoodle]

I have just installed nero & upgraded to 5.5.4.0... all is well until i come to write a CD i get an error during the simulation... the following is the log report... [Writer HP CD12ri]

Hope it makes sense to someone, coz it doesn't to me ?

I have gone with Nero, since Roxio/Adaptec EZCDcreator5 Platinum will not work on my machine after a clean Win2k install ! It used to run fine before !!!

.
.


Windows NT 5.0
WinAspi: File 'Wnaspi32.dll': Ver=4.01 (978), size=22528 bytes, created 7/18/1996 2:26:30 PM
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.28, size=172099 bytes, created 9/1/2001 12:28:28 AM
Nero Version: 5.5.4.0
Recorder: <HP CD-Writer cd12n> Version: 1.34 - HA 2 TA 0 - 5.5.4.0
Adapter driver: <atapi> HA 2
Drive buffer : 2048kB
CD-ROM: <CREATIVE CD3220E SC980217>Version: 1.03 - HA 2 TA 1 - 5.5.4.0
Adapter driver: <atapi> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : IBM-DTTA-351680 atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 93652U8 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : HP CD-Writer cd12n atapi Port 2 ID 0 DMA: Off
CdRomPeripheral : CREATIVE CD3220E SC980217 atapi Port 2 ID 1 DMA: Off
DiskPeripheral : IBM DDRS-39130W S97B symc8xx Port 3 ID 6 DMA: ?
=======================

AutoRun : 1
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 61865984 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523812kB)
Free physical memory: 366MB (375344kB)
Memory in use : 28 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off

CD-ROM (ISO)
1.9.2001

1:31:23 AM #1 Phase 75 File dlgbrnst.cpp, Line 1348
JustLink activated

1:31:23 AM #2 Text 0 File Reader.cpp, Line 117
Reader running

1:31:23 AM #3 ISO9660GEN -11 File geniso.cpp, Line 4226
First writeable address = 0 (0x00000000)

1:31:23 AM #4 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 351862 (351862) = #351862/78:11.37
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

1:31:29 AM #5 Text 0 File DlgWaitCD.cpp, Line 1164
Recorder: HP CD-Writer cd12n;
CDR code: 00 97 25 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: C0 00 80, 2: 61 19 00 (LI 97:25.00), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

1:31:29 AM #6 Text 0 File ThreadedTransferInterface.cpp, Line 803
Prepare recorder CD-Writer cd12n for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 720920576

1:31:29 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 831
Removed 2 run-out blocks from end of track 1.

1:31:29 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 351862 (351862) = #351862/78:11.37
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 351860 blocks [CD-Writer cd12n ]
--------------------------------------------------------------

1:31:29 AM #9 Phase 24 File dlgbrnst.cpp, Line 1348
Caching of files started

1:31:29 AM #10 Phase 25 File dlgbrnst.cpp, Line 1348
Caching of files completed

1:31:29 AM #11 Phase 32 File dlgbrnst.cpp, Line 1348
Simulation started at 12x (1800 KB/s)

1:31:29 AM #12 SCSI -1067 File Cdrdrv.cpp, Line 1101
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0012EB24
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x26 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x30 0x0E 0x01 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

1:31:29 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1841
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

1:31:29 AM #14 SCSI -1067 File Cdrdrv.cpp, Line 1101
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0012E588
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x26 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x30 0x0E 0x01 0x01 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

1:31:29 AM #15 mmc -1067 File ThreadedTransferInterface.cpp, Line 1466
Invalid field in parameter

1:31:29 AM #16 TRANSFER -16 File ThreadedTransferInterface.cpp, Line 1466
Could not perform StartTrack

1:31:29 AM #17 Phase 34 File dlgbrnst.cpp, Line 1348
Simulation failed at 12x (1800 KB/s)

1:31:29 AM #18 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.01 (978), size=14528 bytes, created 7/12/1996 7:31:10 PM

[Wombat]

Are you sure that drive can do DAO?

[dizzynoodle]

YOu mean DAO = Disk at Once ? I guess so, it's their latest Cd-Writer ! It should ! The model is cd-writer cd12ri from HP.


here's the spec sheet for it

CD12ri

[LvR]

dizzynoodle

You saying you actually got Nero to talk to the HP12i?

The latest version I have is 5.5.3.5 and it refuses to speak HP12. I have mailed Nero asking when/if it will be supported with no reply yet. Their official supported drives list also does not include the 12i.

Is there an indication in the 5.5.4.0 version you downloaded that it should be supported?

DONT YOU JUST HATE 11M DOWNLOADS AS AN "UPGRADE"?

[dizzynoodle]

tell me about it ? it recognized the drive and started the process... but failed... i guess u are right it is not supported yet... it even started the justLink service !

[ayoub_ibrahim]

I have gone with Nero, since Roxio/Adaptec EZCDcreator5 Platinum will not work on my machine after a clean Win2k install ! It used to run fine before !!!

win2k doesn't come with an ASPI layer which is need by a burner.
have a read of this page & if you want the ForceAspi program, get it from here!

[The PIT]

Never mind Nero 5.5 doesn't work for me with me Yamaha 2100s. My adaptec works perfectly so what can you say.

[dizzynoodle]

i'm a bit hesitant installing aspi files as the last i did that i got into files troubles, machine went a bit silly ! Whatcha think ? The new version of HP MyCD called Record NOw [produced by Veritas] worked fine when i installed it....

Shouldn't Adaptec EZCD Creator 5 install ASPI files when it install on Win2k on it's own ?

[dizzynoodle]

LVR, what are you using to burn CDs ? Record Now !?!?

[ayoub_ibrahim]

Shouldn't Adaptec EZCD Creator 5 install ASPI files when it install on Win2k on it's own ?

have you tried checking using aspichk.exe from
ftp://ftp.adaptec.com/software_pc/aspi/aspichk.exe
to see if a layer is present & up to date?

[dizzynoodle]

i have and it is fine [ASPI check]... i guess my problem is NERO does not support the drive yet... But what drives me crazy is that Easy Cd Creator is crashing when it starts... why why why ???

[LvR]

dizzynoodle

I have been running ECDC4 reliably under W2K with SP2 - and can burn with Directcd or Easycd - no coasters yet.

Was running Nero on my old Hp9310 reliably as well.

No such luck with the new HP12 though

----------------------------------------------------

edit - Have this morning removed ECDC4 and installed ECDC5 with the 5.02 patch. Easycd seems to be happy to use the HP12n in my system - 7 disks completed with no hassles. Direct cd 5 says it is unable to speak HP12n and therefore refuse to even start. Have mailed Roxio and asked about it about 2 hours ago.

[dizzynoodle]

LVR, I think my problrm is a Win2k issue, even though it was running fine before the re-install, but EeasyCDCreator5 refuses to start, it keeps crashing everytime i start it ! I have re-installed about 6 times... no hope... weird ! I wonder if i can fix it some othert way, Norton Utilities or something ! There seems to be a conflict somewhere how the hell do i figure it out ?

[LvR]

Dizzynoodle

Did you perhaps have ECDC4.0.5 running on that machine before you installed ECDC5 - maybe the basics for W2K support was there before you installed ECDC5, and with the clean install you wiped it.

[dizzynoodle]

could be i may give that a try... now i would be worried that if i do install EZCDc 4 is screwup my WInonCD3.8 ! as i believe i would have to uninstall that first right ?