Announcement

Collapse
No announcement yet.

textures corruption.....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • textures corruption.....

    I have a G400 16mb dualhead but when I o/c it , my display become's corrupted after about 30min of playing. Is there a way to correct this?

    these are the settings I use
    PLL = 396.00
    gclk = 2.5
    mclk = 2
    wclk = 2.5
    duty cycle 8/11/8

    sgram optimisation
    3/2/4/9/4/1/fast/1/1/1/0.2/0.2/1921
    P3-667@810 retail, Asus CUSL2-C, 2*128 mb PC-133(generic), G400DH 16mb, SBLive value, HollyWood+, 1*Realtek 8029(AS) and 1*Realtek 8039C, Quantum 30g, Pioneer DVD-115f

  • #2
    Lower your settings and / or get better cooling. You're overheating your card, either the RAM or the G400 chip.

    ------------------
    "I wrestled with reality for 27 years and I'm happy to say I finally won out over it."
    "I wrestled with reality for 27 years and I'm happy to say I finally won out over it."

    Comment


    • #3
      That's strange because the memory chips and the G400 core are'nt that hot....
      P3-667@810 retail, Asus CUSL2-C, 2*128 mb PC-133(generic), G400DH 16mb, SBLive value, HollyWood+, 1*Realtek 8029(AS) and 1*Realtek 8039C, Quantum 30g, Pioneer DVD-115f

      Comment


      • #4
        RAM chips tend not to get hot - I run the 8ns SEC RAM on my G200 SD at 160MHz for hours and they never even feel warm to the touch. It doesn't take much to upset them - a 1C difference in internal temperature can have a huge impact on their stability (especially when you consider that they are being pushed to / beyond their rated speed), which is why the use of heatsinks on RAM chips is starting to become more popular with OCers.

        ------------------
        "I wrestled with reality for 27 years and I'm happy to say I finally won out over it."
        "I wrestled with reality for 27 years and I'm happy to say I finally won out over it."

        Comment

        Working...
        X