Announcement

Collapse
No announcement yet.

G400 Vanilla 32MB DH at 190Mhz Core

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • G400 Vanilla 32MB DH at 190Mhz Core

    Well, I took MGATweak to 1.5x like ya'll said. It didn't like that at all. I could do 166 but 175 crashed hard.
    Then I tried 2.0x, guess what, maxxed out at 190Mhz, 195 died, 200 died. Probably would do 192 or something.

    Just wish I had some 5ns SGRAM, or 4.3 or 3ns.......heh heh.


    3DMark 99 MAX Pro...2x
    1024x768x32bit

    160/200/160=4986
    175/175/175=4687
    185/185/185=4821
    190/190/190=4971
    Fillrate =186.6
    Fillrate w/ multi=214.2

    I believe the reason 160/200/160 is faster is due to serious memory bandwidth limitations. There are no SGRAM timing changes in the above results, and Vsync is off.

    My system:

    P3-558 L2 Cache Latency 4
    192MB RAM, Cas 2, 124MHz
    Matrox Millenium G400 32MB Vanilla DH\
    Creative SBLive Value
    Quantum Fireball Plus KA 13.6
    Quantum Fireball ST 4.3
    3Com Fast Etherlink XL
    Toshiba 6X/32X DVD
    Sony CDU928E CDR


  • #2
    hmmm, you be getting much better fill rate than that
    jim

    ------------------
    PIII-500mhz @ 620 ! with an Abit BE6 mobo
    128mb pc-100
    Mill G400 (YAHOO!!!) 32mb @ 167/208 with MGATweak-417mhz, (2.5, 2, 2.5), PD 5.41 & bios 1.5-22
    Maxtor 14.3 gb Uata66 hdd
    SB Live!
    Winblows 98se & DX7
    32 lbs. of fans, heatsinks and aluminum ductwork
    3DMark Result 5954.69 3DMarks
    Synthetic CPU 3D Speed 9325.69 CPU 3DMarks
    Rasterizer Score 2791.72 3DRasterMarks
    Game 1 - Race 65.07 FPS
    Game 2 - First Person 54.89 FPS
    Fill Rate 268.79 MTexels/s

    System 1:
    AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
    Epox 8K7A
    2x256mb Micron pc-2100 DDR
    an AGP port all warmed up and ready to be stuffed full of Parhelia II+
    SBLIVE 5.1
    Maxtor 40g 7,200 @ ATA-100
    IBM 40GB 7,200 @ ATA-100
    Pinnacle DV Plus firewire
    3Com Hardware Modem
    Teac 20/10/40 burner
    Antec 350w power supply in a Colorcase 303usb Stainless

    New system: Under development

    Comment


    • #3
      Dude.. my G400 is not down with your setting Durango. I have to have mine at 2.25/2.02.25 with 410.40 PLL which makes it 182/205.

      I tried your settings and i got the random lines thing across the screen.

      Weird.

      CB


      ------------------
      Abit BX6 Rev.1
      Celeron 366A PPGA @ 566, 2.1v
      192 meg RAM, CAS2
      13.0 gig Maxtor 4320 HD
      6.0 gig Maxtor (removeable drive bay)
      HP8110i 4x2x24
      Creative DVD 5x
      Creative DxR2
      SB Live! Retail
      USB ZIP 100
      G400 32MB DH 5ns RAM
      Two KDS 17" Trinitron monitors


      Abit BX6 Rev.1
      Celeron 366A PPGA @ 566, 2.1v
      192 meg RAM, CAS2
      13.0 gig Maxtor 4320 HD
      6.0 gig Maxtor (in removeable drive bay)
      HP8110i 4x2x24
      Pioneer DVD-104
      SB Live! 1024
      USB ZIP 100
      G400 32MB DH 5ns RAM at 187/211
      Two KDS 17" Trinitron monitors
      YAMAHA HTR-5140 Reciever

      Comment

      Working...
      X