Announcement

Collapse
No announcement yet.

Matrox Tweak Utility, am I using this right?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Matrox Tweak Utility, am I using this right?

    Well.. i have noticed an increase in actual gaming.. with either the Matrox or the MGA tweak utils.

    Actually.. i Noticed a big difference when I had the mem clock at 202MHz and the core at 177MHz... and, i did not notice any artifacts or anything.. that was with the MGA tools..

    I did put a fan on the heatsink. the reason being I have a OEM G400 32MB DH and it has a whimpy-ass heatsink on it.. well.. unlike the pictures at least.
    Abit BX6 Rev.1
    Celeron 366A PPGA @ 566, 2.1v
    192 meg RAM, CAS2
    13.0 gig Maxtor 4320 HD
    6.0 gig Maxtor (in removeable drive bay)
    HP8110i 4x2x24
    Pioneer DVD-104
    SB Live! 1024
    USB ZIP 100
    G400 32MB DH 5ns RAM at 187/211
    Two KDS 17" Trinitron monitors
    YAMAHA HTR-5140 Reciever

  • #2
    ok well using MGAtweak then what are the exact settings I should use, please explain in detail

    ------------------
    ***TRUST IN YOUR TECHNOLUST***
    <A HREF="http://jediphoenix.iscool.net/
    " TARGET=_blank>http://jediphoenix.iscool.net/
    </A>

    Comment


    • #3
      Here is what it should look like:

      System PLL Clock :
      Fo=301.50MHz

      Clock Dividers & Selection :
      GCLK=Fo/2.00 SYSPLL
      MCLK=Fo/1.50 SYSPLL
      WCLK=Fo/2.00 SYSPLL
      (Use Auto Duty Cycle Correction)

      SDRAM/SGRAM Optimization

      3, 1, 3, 8, 3, 1, Fast, 1, 1, 1, 1,4, 1,4, 2497

      Miscellaneous Control :

      Everything on

      I hope this helps!
      According to the latest official figures, 43% of all statistics are totally worthless...

      Comment


      • #4
        Matrox Tweak Utility, am I using this right?

        I have a question, I have a vanilla g400 32 meg AGP, but it does have the 5ns ram on it like the max(some say im lucky ) I overclocked the card to 120% using matrox tweak utility and the heatsink did not even get any hotter than before and I saw no increase in 3dmark99 scores. Is that right? should I not see a difference? Thx Jediphoenix

        ------------------
        ***TRUST IN YOUR TECHNOLUST***
        <A HREF="http://jediphoenix.iscool.net/
        " TARGET=_blank>http://jediphoenix.iscool.net/
        </A>

        Comment

        Working...
        X