3Dmark CHECK THIS OUT !!!!

[Borg]

yahooooo ! check this link : http://qa.madonion.com/performance/o...ts.shtml?3dacc

I think I can make it over that UTNT..

[Maggi]

errm ... I don't wanna bother you, but that link interacts with a cookie on your harddisk ...

[Maggi]

in case you didn't understand what I was trying to say:

I get a 'no results submitted error' when following your link .. .you should either copy'n'paste your results or do it the fancy way ...

[Borg]

stupid me .... here I make a copy/paste
thnx !

its on Intel650 PIIIcu @ 800 (FSB124)
so I was in 800 cpu type on 3dmark

6240
NVIDIA GeForce2 GTS


4907
NVIDIA GeForce DDR


4833
NVIDIA GeForce DDR


4550
NVIDIA GeForce SDR


4249
3dfx Voodoo5 5500


4177
NVIDIA GeForce SDR


3476
NVIDIA RIVA TNT2 Ultra


3435
Matrox G400 THIS ONE IS MINE


3232
Matrox G400 MAX


3141
S3 Savage2000


3082
NVIDIA RIVA TNT2


2959
3dfx Voodoo3 3500


2889
3dfx Voodoo3 2000/3000


2869
Matrox G400


2461
3dfx Voodoo2 SLI


2217
ATI RAGE 128 PRO


2088
NVIDIA RIVA TNT


2017
NVIDIA TNT2 m64


1850
NVIDIA TNT2 Vanta


1723
ATI RAGE 128


1483
S3 Savage4


1377
3dfx Voodoo Banshee

[Borg]

ahh ! yes ..standard 3DMARK settings , 1024 x768x16 , triple buff, vsync of , Intel PIII optimization ..monitor @ 110Hz ADI 5GT

[Maggi]

not stupid ... only 'not knowing' ...

Nice score you have, but if you follow the link I gave above, you'll find some other nice scores too.



Cheers,
Maggi

[Borg]

man !...how do you copy the whole picture...Im realy not knowing...
I would like to post it too because no one will trust me other way..buuuuuuu gonna crye..

[Maggi]

follow that link ... you'll find detailed instructions how to post it as screenshots.

[Mark F]

Is this OK?

CPU Intel Pentium III 800 Mhz
3D Accelerator 3D Prophet II GTS
Chipset NVIDIA GeForce2 GTS
Resolution 768*1024
Z-Buffer Depth 16-bit
Frame Buffer Triple
Refresh Rate V Sync.Off
CPU Optimization D3D Hardware T&L

3DMark Result 6711 3D marks
CPU Speed 517 CPU 3D marks
Game 1 - Helicopter - Low Detail 134.7 FPS
Game 1 - Helicopter - Medium Detail 98.5 FPS
Game 1 - Helicopter - High Detail 52.6 FPS
Game 2 - Adventure - Low Detail 154.8 FPS
Game 2 - Adventure - Medium Detail 74.8 FPS
Game 2 - Adventure - High Detail 43.8 FPS
Fill Rate (Single-Texturing) 634.2 MTexels/s
Fill Rate (Multi-Texturing) 1304.9 MTexels/s
High Polygon Count (1 Light) 9148 KTriangles/s
High Polygon Count (4 Lights) 7333 KTriangles/s
High Polygon Count (8 Lights) 4706 KTriangles/s
8MB Texture Rendering Speed 444.7 FPS
16MB Texture Rendering Speed 350.0 FPS
32MB Texture Rendering Speed 193.0 FPS
64MB Texture Rendering Speed 98.2 FPS
Bump Mapping (Emboss, 3-pass) 222.8 FPS
Bump Mapping (Emboss, 2-pass) 294.4 FPS
Bump Mapping (Emboss, 1-pass) 482.2 FPS


I've now got a 650FC@866 in that box. I'll have to try and test it sometime. Also the box has not been optimized for 3DMark or the sacraligous board (it only replaced my TNT2 not any of my Matrox cards). Also this is the third board in this box without a reinstall. BX board with everthing stock exept FSB.

Mark F.


------------------
OH NO, my retractable cup holder swallowed a DVD...
and burped out a movie

[Maggi]

Not bad, Mark ...

I presume you run a 100MHz FSB, because your AGP texturing seems a bit low to me and further I'd think you should pass the 7000 barrier.

Oh wait ... you wrote your FSB would not be in spec ... what's up with your AGP transfers ???

Also is the a 64 megger or only half of it ?

L8r,
Maggi

[SteveC]

When experimenting a few weeks back with different 'borrowed' PC133 RAM, I got my G400 up to 3700 3dmarks at one point, but do you think I can get that again? Stoopid computers! (At least a friend who has a Geforce 2 witnessed this result, and can't beat it with his celery I 466 ... heh heh

------------------
Cheers,
Steve

"Life is what we make of it, yet most of us just fake"

[Mark F]

AGP is at 89MHz. BX@133 and all. Card runs AGP2X, but no SBA. Not sure why, maybe the driver version. PciList has this to say:
AGP revision - 2.00
VGA IRQ - IRQ11, not shared
AGP aperture - 64MB
System board AGP transfer support - 1x, 2x
Graphics card AGP transfer support - 1x, 2x, 4x
AGP traffic currently enabled - 2x
System board SBA - supported
Graphics card SBA - n/a
AGP sideband currently enabled - no
Pipelined transactions - supported, queue depth of 32
Fast write protocol - supported, currently n/a

On the MadOnion Online Results Browser (ORB), it's shown as the fastest PIII-800 score. One of these days when I feel like waisting time, running another benchmark, I'll see what it can do with the 866.

Memory? I don't know
>putting finger to nose<
I'll say this much, the board is running at the speed it shiped at, and with the original BIOS it shipped with. I haven't changed or optimised anything on it yet.

Mark F.

------------------
OH NO, my retractable cup holder swallowed a DVD...
and burped out a movie

[Mark F]

OK @866 here goes:

CPU Intel Pentium III 862 Mhz
3D Accelerator 3D Prophet II GTS Chipset NVIDIA GeForce2 GTS
Resolution 768*1024
Z-Buffer Depth 16-bit
Frame Buffer Triple
Refresh Rate V Sync.Off
CPU Optimization D3D Hardware T&L

3DMark Result 6939 3D marks
CPU Speed 538 CPU 3D marks
Game 1 - Helicopter - Low Detail 141.0 FPS
Game 1 - Helicopter - Medium Detail 101.8 FPS
Game 1 - Helicopter - High Detail 53.2 FPS
Game 2 - Adventure - Low Detail 156.8 FPS
Game 2 - Adventure - Medium Detail 79.1 FPS
Game 2 - Adventure - High Detail 46.4 FPS
Fill Rate (Single-Texturing) 634.3 MTexels/s
Fill Rate (Multi-Texturing) 1305.2 MTexels/s
High Polygon Count (1 Light) 10535 KTriangles/s
High Polygon Count (4 Lights) 7956 KTriangles/s
High Polygon Count (8 Lights) 5513 KTriangles/s
8MB Texture Rendering Speed 445.8 FPS
16MB Texture Rendering Speed 361.0 FPS
32MB Texture Rendering Speed 204.8 FPS
64MB Texture Rendering Speed 104.6 FPS
Bump Mapping (Emboss, 3-pass) 223.7 FPS
Bump Mapping (Emboss, 2-pass) 294.3 FPS
Bump Mapping (Emboss, 1-pass) 482.7 FPS


Hey Maggi-
what's up with your AGP transfers
I haven't seen a result like AGP transfer speed in 3DM2K. Is it like in 3DM99, were you had to run it seperatetly? OOPPPS I'm thinking of Final Reality. NNEVVERR MIINND.

Any way I think that's enough time waisting with the all important BenchMarks.

Mark F.

------------------
OH NO, my retractable cup holder swallowed a DVD...
and burped out a movie

[Maggi]

Nice scores Mark !

By AGP transfer I was refering to the 64MB texture rendering tests, becasue even if you have 64MB onboard, you'd still need a portion of that for your display buffers and hence it has to use AGP.

Must be cool to have +1 GTexel btw ...

CU,
Maggi

PS: if you're not too annoyed, could you do me a favor and compare 16bpp vs. 32bpp ?
Ìt seems that the result could be very surprising ...

[Mark F]

I'll give it a run tonight, if the DL version alows it to be changed. I thought you could only run it in the default mode.

The (not so) funny thing about it is that the box started with a TNT, then got a TNT (Canopus) ULTRA (Hercules), now has the GF2 (Guillmont/Hercules). Sortly after getting each of the first 2 cards the company went POOF (no not to a poof). One pulled out of the US market, the other shute it doors, only to be eventually takes over by the make of the current card. Bad omen, Bad JUJU, who knows?

But my G200, G400MAX, and G400 are all still running in systems. Oh yeah even my MilleniumII PCI is still in a box I'm supposed to get back as part of my devorse settlement (OOOHHH I get a Pentium with PCI video back WOW!). Now that's staying power!!

Man I wish I could head over to your area this summer. I haven't been there with the DOLLAR around 2.20 -DM in a long time! My cousin is over here, he had to cut his summer travel plans by a good bit, because it's so bad tradeing -DM for $I.

'll let you know in a few hours how it runs in 32bit.

Mark F.

------------------
OH NO, my retractable cup holder swallowed a DVD...
and burped out a movie