No audio output to VCR

[metalslug]

This has been annoying me for quite a whiel but only now is it a major problem.
When i try to output my picture to my TV/VCR
it workd fine (with dual head clone enabled)
but there is NO SOUND..
I am connecting the VCR with a Scart cable to the Hub like it recommends in the manual..someone must be able to cure my problem!

------------------
*~MeTALSlug~*

[Rags]

Did you connect your soundcard to the audio in on your vcr?

Rags

[Kruzin]

The G400 is a VIDEO card, not a SOUND card.
If you want SOUND output to your VCR, you need to do so from your SOUND card...

[chaid]

I have the same (or similar) problem.

I have a Marvel G400.
On the BreakOutbox the audio out RCA plugs are not functioning (no sound). The big black cable with associated audio in and out plugs is connected and the audio plugs are connected to my sound card.

I've swapped the audio in and audio out lines and still have the problem. I do get TV in audio, so at least one direction is working. I would expect the audio plug to go directly to the audio out rca jacks on the BOB. My workaround is to go directly from sound card to vcr, however it would be nice to work as desired.

Any Ideas?