Announcement

Collapse
No announcement yet.

How to force agpx2 ?????

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to force agpx2 ?????

    I have just found out that Im "only" running my g400 at agpx1 and since it is a agpx2(4) card I would like to know how I can get it to run in x2.

    Thanks
    System:
    Asus A7V rev. 1.01p bios 1011
    AMD Thunderbird 800
    SBLive retail with liveware 3.0
    Matrox g400 MAX pd 6.51
    LG Flatron 795FT 17" monitor
    IBM 13.5 GB 7200 hdd
    Pioneer 106-s dvdrom
    WinME
    directx 8.0a
    384mb pc133

  • #2
    You can use http://www.murc.ws/Utils/PD5RegHacks.zip . Run ForceAGP2x.reg.

    Comment


    • #3
      What motherboard do you have?????

      Paul
      "Never interfere with the enemy when he is in the process of destroying himself"

      Comment


      • #4
        My specs are:
        k6-3 450
        asus p5a mobo bios 1.07
        128 mb sdram
        v2 12 mb
        13,5 gb Deskstar hdd
        System:
        Asus A7V rev. 1.01p bios 1011
        AMD Thunderbird 800
        SBLive retail with liveware 3.0
        Matrox g400 MAX pd 6.51
        LG Flatron 795FT 17" monitor
        IBM 13.5 GB 7200 hdd
        Pioneer 106-s dvdrom
        WinME
        directx 8.0a
        384mb pc133

        Comment


        • #5
          Well, I have tried the registry hack but it did not change anything!

          Any ideas how to enable agpx2 would be greatly appreciated.
          System:
          Asus A7V rev. 1.01p bios 1011
          AMD Thunderbird 800
          SBLive retail with liveware 3.0
          Matrox g400 MAX pd 6.51
          LG Flatron 795FT 17" monitor
          IBM 13.5 GB 7200 hdd
          Pioneer 106-s dvdrom
          WinME
          directx 8.0a
          384mb pc133

          Comment


          • #6
            use G400Tweak. regards

            Comment


            • #7
              If the reg hack did nothing at all, it probably went to the wrong key. Look at your registry, and look at that reg hack. Make sure the last branch of the key is the same (0000, 0001, etc). If it went to 0000, and your G400 is set up at 0001, it wont do a thing.

              At the very least, it should either go into 2x, or crash. If it does nothing at all, something else is up...
              Core2 Duo E7500 2.93, Asus P5Q Pro Turbo, 4gig 1066 DDR2, 1gig Asus ENGTS250, SB X-Fi Gamer ,WD Caviar Black 1tb, Plextor PX-880SA, Dual Samsung 2494s

              Comment


              • #8
                Ok, I have a dumb question. How do you know if your adapter is running agp 1x or 2x?

                Comment


                • #9
                  IF the registry hack didn't do anything, then as stated earlier your card is probably on 0001 or 0002 etc instead of 0000 which is what the hack works on.
                  Start regedit, and go to the following key
                  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\Class\Display
                  You'll probably see a couple entries.. one with 0000 and the other 000whatever
                  edit the second one.. it'll be the one with more keys in it
                  Click on the CPU entry, and add the key AGPflags and set the value to -1
                  reboot, and you should be running 2x

                  Comment


                  • #10
                    Grego: How do you know it´s still working in AGP1x? (Pcilist, Sisoft, Powerstrip?)

                    Or you are asuming it´s still working at AGPx1 because you don´t notice any performance improvement? If so, welcome to the wonderfull world of AGP... With 32 Mb Video RAM, I doubt any game today will need that memory so it needs AGP texturing. So, No AGP, AGPx1, AGPx2, it just doesn´t matter.

                    Be aware that some Super7 boards are not working that good with agpx2.

                    Comment


                    • #11
                      Thanks for all the input, I will try them as soon as I get back to my computer again.

                      I use the program pcilist to find out whether I'm running agpx1 or x2. Skycriesmary (hope I got it right ;-) ) you can get this program from the download section here on murc. I really look forward to changing my registry.

                      Regards
                      Grego
                      System:
                      Asus A7V rev. 1.01p bios 1011
                      AMD Thunderbird 800
                      SBLive retail with liveware 3.0
                      Matrox g400 MAX pd 6.51
                      LG Flatron 795FT 17" monitor
                      IBM 13.5 GB 7200 hdd
                      Pioneer 106-s dvdrom
                      WinME
                      directx 8.0a
                      384mb pc133

                      Comment


                      • #12
                        Well I have now tried checking the registry, and the hack had done its job properly, that is adding the string AGPflags -1 but it still only runs at x1 when I check with pcilist, maybe I should just lean back and wait for the next driver release and see if that changes anything?
                        Well it cannot change the fact that this is one hell of a card!!
                        System:
                        Asus A7V rev. 1.01p bios 1011
                        AMD Thunderbird 800
                        SBLive retail with liveware 3.0
                        Matrox g400 MAX pd 6.51
                        LG Flatron 795FT 17" monitor
                        IBM 13.5 GB 7200 hdd
                        Pioneer 106-s dvdrom
                        WinME
                        directx 8.0a
                        384mb pc133

                        Comment


                        • #13
                          I also have the same Asus P5A rev1007 mobo and here's what i did to enable AGP2X for my OEM G400 16Mb.

                          Goto:
                          HKEY_LOCAL_MACHINE\Software\ALi\ALi AGP Driver\AGPDataRate and set value from "0" to "2"

                          and
                          HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\Class\Display\0000\Settings\CPU\AGPFlags set to "-1"

                          This will enable AGP2X. Not to many know that although the registry hack is already making the G400 itself running at AGP2X, but its the mobo that is stopping it from screaming at AGP2X due to the ALi AGP settings. I'm not so sure of the case with MVP3 mobos.

                          Anyway, anyone know what are the best settings for FrameBufferSize (currently value is "C") and GATMode inside HKEY_LOCAL_MACHINE\Software\ALi\ALi AGP Driver\ ??


                          ------------------
                          AsusP5A rev1007, K6-400 o/c to 448 (112*4), 128Mb Micron PC100 -8E SDRAM, G400 OEM 16Mb AGP, IBM 16GP 8.4, Quantum ST 3.2A, Toshiba 32X CDROM, HP CDWriter 7570i, SBLive! Value, Intel EtherXpress Pro 100TX NIC, Motorola CableModem, RIC 17" Monitor, HP Deskjet 710C, Altec Lansing ACS45 & Cambridge PCWorks,

                          Comment


                          • #14
                            Hey thanks for the info....pclist is a pretty cool tool.

                            Comment


                            • #15
                              Hey thanks a lot Song, wouldn't you know it, it works, I also had to change the string forceagp from 0 to 1 in the ali entry, but I would never have found the entry without your post - THANX this is one happy little camper!!!
                              System:
                              Asus A7V rev. 1.01p bios 1011
                              AMD Thunderbird 800
                              SBLive retail with liveware 3.0
                              Matrox g400 MAX pd 6.51
                              LG Flatron 795FT 17" monitor
                              IBM 13.5 GB 7200 hdd
                              Pioneer 106-s dvdrom
                              WinME
                              directx 8.0a
                              384mb pc133

                              Comment

                              Working...
                              X