or is the Matrox G400 be able to work with AGP 2x on AGP=93MHz ??? (PIII500@770 )
Announcement
Collapse
No announcement yet.
140MHz FSB (BX board) and G400?
Collapse
X
-
Ask your local witch doctor to rattle the bones to predict success. In other words, you'll have to try.P3@600 | Abit BH6 V1.01 NV | 256MB PC133 | G400MAX (EU,AGP2X) | Quantum Atlas 10K | Hitachi CDR-8330 | Diamond FirePort 40 | 3c905B-TX | TB Montego A3D(1) | IntelliMouse Explorer | Iiyama VisionMaster Pro 17 | Win2K/NT4
-
yeah, so I will try (because now it is working at AGP 1x....), I just wanna know if there is chance to success (btw: my witch doctor is using liver for predicting futurePIIIE-550@733 Abit BF6, 192MB PC133 RAM, 2x IBM 27GB on FASTTRACK66 RAID, AOPEN 9632 DVD, SBLIVE!, G400 32M DH@(160/200) ADI 17', Askey TV card
Comment
-
Both a vanilla and a Max maxed out at 92mhz on my board, a Soyo SY6BA+IV. Since they both had the same limit, though, it might be the north bridge and not the cards. AGP 2x with sidebanding. Going to 93mhz produces a lock-up a few seconds into 3dmark. Can run Word, AOL, etc. up to 100mhz, though.PIII 500e @667
Soyo SY6BA+IV
Iwill Slotket II
G400 32MB Max
Nokia 445Xi 21"
and POS 14"
Aureal Vortex Superquad
256MB PC133
IBM DPTA 20.5GB 7200rpm
Toshiba 8/40 DVD
Comment
-
Liver? Ouch, no wonder you're asking!
You'll be beating the odds if you get it working, but the odds have been beaten before...P3@600 | Abit BH6 V1.01 NV | 256MB PC133 | G400MAX (EU,AGP2X) | Quantum Atlas 10K | Hitachi CDR-8330 | Diamond FirePort 40 | 3c905B-TX | TB Montego A3D(1) | IntelliMouse Explorer | Iiyama VisionMaster Pro 17 | Win2K/NT4
Comment
-
Just noticed your math. To get a 500 to 770 you'll need an AGP over 100mhz if this is a BX board. Are you starting with a 550 perhaps?PIII 500e @667
Soyo SY6BA+IV
Iwill Slotket II
G400 32MB Max
Nokia 445Xi 21"
and POS 14"
Aureal Vortex Superquad
256MB PC133
IBM DPTA 20.5GB 7200rpm
Toshiba 8/40 DVD
Comment
-
There's nothing like beating the oddsP3@600 | Abit BH6 V1.01 NV | 256MB PC133 | G400MAX (EU,AGP2X) | Quantum Atlas 10K | Hitachi CDR-8330 | Diamond FirePort 40 | 3c905B-TX | TB Montego A3D(1) | IntelliMouse Explorer | Iiyama VisionMaster Pro 17 | Win2K/NT4
Comment
-
Yeah i got my g400 running at 140 FSB on a be6. No problems
Matrox G400 default benchmark
PIII 600B (PIII 450 @ 133 FSB)
2985
203
PIII 668EB (PIII 500E @ 133 FSB)
3158
226
PIII 700EB (PIII 500E @ 140 FSB)
3205
242
Voodoo 2 SLI default @ benchmark
PIII 600B (PIII 450 133 FSB)
2481
152
PIII 668EB (PIII 500E @ 133 FSB)
2633
171
PIII 700EB (PIII 500E @ 140 FSB)
2649
178
Tried pushing it to 150 FSB but ocassionally hangs in windows, not that stable.
Comment
-
My g400 max runs at 100 AGP with everything enabled,yes agp x 2 and sidebanding.
I had to increase my IO voltage from 3.3 to 3.5 to achieve this,but it does it flawlessly
in qIII and anything else I can throw at it,this was done on an abit bf-6.
Comment
Comment