Announcement

Collapse
No announcement yet.

EasyCD creator 4.0 & Marvel G400

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    EasyCD creator 4.0 & Marvel G400

    --------------------------------------------------------------------------------
    I has a G400-TV Marvel.
    but system will reboot when run EasyCD Creator 4.0. Why? How to fix it?
    Under Win98

    Thank!
    R'one
    Tags: None
  • #2
    Make sure you have the latest drivers....if the problem persists, try running at 16 bit color vs 32 bit before opening ECDC.
    =========================
    <font size="1">ABIT VP6, Dual PIII 1.0Ghz's | 768 MB of Kingston RAM |
    Dual IBM C-71 17" monitors | Matrox G400Max | Seagate Cheetah 10k 9.1gb SCSI U2W drive | Adaptec 2940U2W SCSI Controller | Maxtor 60 GB and 80GB 7.2k IDE drives | Plextor Ultraplex 40max SCSI CD player
    and Plexwriter 24/10/40a writer | Seagate Scorpion SCSI DAT drive | Turtle Beach Santa Cruz | LinkSys NIC | <a href="http://lianli.com/11302001jcL_pc_case/jclpccase/jclpccase/pc70.html">Lian Lee PC-70USB Aluminum Tower </a> with 430 watt power supply
    | assorted external SCSI and USB stuff | WinXP Pro</font></font>

    Comment

    • #3
      I sure use new feiver. (Ver.5.41 & BIOS 1.05 22). I will try 16 & 32 bit color then run ECDC 4.0.
      If the resule is the same?
      R'one

      Comment

      • #4
        I sure use new feiver. (Ver.5.41 & BIOS 1.05 22). I will try 16 & 32 bit color then run ECDC 4.0.
        If the resule is the same?

        ------------------
        R'one
        R'one

        Comment

        • #5
          Matrox does not support the 5.41 driver with the Marvels

          Comment

          Previous template Next
          Working...
          X