Announcement

Collapse
No announcement yet.

G400 Max lockup..

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • G400 Max lockup..

    Can't even boot to windows, after I log in
    the computer just locks up

    got a Microstar 5184 (via chipset)
    with 64mb of sdram
    and a K6-3 400 mhz.

    -Johan-

  • #2
    Do this exactly:

    Download the new G400 drivers (which you have already =) ), download the 4in1 driver pack from Via, download the uninstall utility from Matrox, run the uninstall utility, reboot switch to standard Vga adapter and reboot, install the 4in1 driver pack (don't install the IRQ miniport) in normal mode reboot and go into your bios and disable "read around write" save settings and exit, boot into windows and run the setup for PD 5.30, reboot and you should be up to speed.

    Rags



    ------------------
    Somebody give me a cheeseburger!!!


    Comment


    • #3
      A browse through recent postings seems to indicate that rev 5.30 just doesn't work well with the VIA chipset whereas 5.25 seems to be okay. Rather than struggling with incompatabilities, you might want to use ver 5.25 and wait a little while for Matrox to remedy the apparent problem with 5.30.

      ------------------
      BX6r2, 128MB PC100, C366A@567, Pan DVDwHollywood+,Pan 4X SCSI II CDR, WangDAT, Quantam UDMA HDs, Fireport 40 UW, SBLive!Value (attached to bi-amped TEAC/Hitachi multimedia system), SMC Intel 21041 NIC, etc. G200 Mystique as well.

      Office: Giga266A, XP1900+, 1GB PC2100. 80GB Maxtor, Matrox G550 Integraph 21", Sceptre 19"
      Home:#1.Abit IS7, 512MB OCZ DDR 533, P4C2600 at 3260, LiteOn 411S DVDRW, LiteOn 481248 CDRW,WD 80G ATA100, Audigy, 2X IBM P202, Radeon 9600 Pro as well.
      #2. TB 1.33G/KR7AR133/512MB PC2100. MSI GF4-4200TI, Maxtor 13.6/40G drives/Ricoh 121032 CDRW, Hitachi 8X DVD, AOpen 52X. etc.
      #3. P3-700-512MB/BX6R2/GF2MX400/
      etc. #4,#5 Various P2 with G400, G200.

      Comment


      • #4
        I have 5.3 running fine on my VA 503+.

        It can be done, you just have to have the settings right.

        Rags



        ------------------
        Somebody give me a cheeseburger!!!


        Comment


        • #5
          EXACTLY! both of you
          jim

          ------------------
          PIII-500mhz @ 620! with an Abit BE6 mobo
          128mb pc-100
          Mill G400(YAHOO!!!) 32mb @ 165/205 with MGATweak), PD 5.30 & bios 1.5-22
          Maxtor 13.2 gb Uata66 hdd
          SB Live!
          Winblows 98se & DX7
          FOUR BIG FANS, six little ones and a case that sounds like a turbine engine...doh!
          3DMark Result 5954.69 3DMarks
          Synthetic CPU 3D Speed 9325.69 CPU 3DMarks
          Rasterizer Score 2791.72 3DRasterMarks
          Game 1 - Race 65.07 FPS
          Game 2 - First Person 54.89 FPS
          Fill Rate 268.79 MTexels/s

          System 1:
          AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
          Epox 8K7A
          2x256mb Micron pc-2100 DDR
          an AGP port all warmed up and ready to be stuffed full of Parhelia II+
          SBLIVE 5.1
          Maxtor 40g 7,200 @ ATA-100
          IBM 40GB 7,200 @ ATA-100
          Pinnacle DV Plus firewire
          3Com Hardware Modem
          Teac 20/10/40 burner
          Antec 350w power supply in a Colorcase 303usb Stainless

          New system: Under development

          Comment


          • #6
            gonna plug in the card and test now, downloading the 5.25 drivers atm.

            Comment


            • #7
              nope, same result, I'm returning the card.

              -Johan-

              Comment

              Working...
              X