Announcement

Collapse
No announcement yet.

G400. Do i have the mill?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    G400. Do i have the mill?

    When i install the drivers 5.20 they informe me about my card. Mill G400 with 16MB ram.
    Is there a G400 card plane? (no mill)??
    How can i find out if there is a mill or not??
    Tags: None
  • #2
    no
    jim

    ------------------
    PIII-500mhz @ 620!
    Abit BE6 mobo
    128mb pc-100
    Mill G400(YAHOO!!!) 32mb @ 120%)
    PD 5.30
    Maxtor 13.2 gb Uata66 hdd
    SB Live!
    Winblows 98se
    DX7
    THREE BIG FANS, six little ones and a case that sounds like a turbine engine...doh!


    System 1:
    AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
    Epox 8K7A
    2x256mb Micron pc-2100 DDR
    an AGP port all warmed up and ready to be stuffed full of Parhelia II+
    SBLIVE 5.1
    Maxtor 40g 7,200 @ ATA-100
    IBM 40GB 7,200 @ ATA-100
    Pinnacle DV Plus firewire
    3Com Hardware Modem
    Teac 20/10/40 burner
    Antec 350w power supply in a Colorcase 303usb Stainless

    New system: Under development

    Comment

    • #3
      At this point, all G400s are either a Millennium of some form, or a Marvel...
      Core2 Duo E7500 2.93, Asus P5Q Pro Turbo, 4gig 1066 DDR2, 1gig Asus ENGTS250, SB X-Fi Gamer ,WD Caviar Black 1tb, Plextor PX-880SA, Dual Samsung 2494s

      Comment

      • #4
        didn't I just say that?
        jim
        System 1:
        AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
        Epox 8K7A
        2x256mb Micron pc-2100 DDR
        an AGP port all warmed up and ready to be stuffed full of Parhelia II+
        SBLIVE 5.1
        Maxtor 40g 7,200 @ ATA-100
        IBM 40GB 7,200 @ ATA-100
        Pinnacle DV Plus firewire
        3Com Hardware Modem
        Teac 20/10/40 burner
        Antec 350w power supply in a Colorcase 303usb Stainless

        New system: Under development

        Comment

        • #5
          If you're just dying to see the word "Millenium" spelled out, do the following:

          Click on that little monitor icon in your system tray at the lower left hand corner of your screen. Window Display Properties should pop up. It should give you the name of your board and monitor.

          Now, click on the "Advanced" button. Click on the "Information" tab. You should get a fair bit of information about your board here, including its name.

          Paul
          paulcs@flashcom.net

          Comment

          Previous template Next
          Working...
          X