Announcement

Collapse
No announcement yet.

coolin

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • coolin

    ok so i have this mini fan thingy... its like approx 2.5 inches i think.. i think its a socket 7 fan so... i have a standard oem dualhead 32 mb non max and i was wondering how should i attach the fan?...

  • #2
    also if i never ever changed any agp settings its defaulted to 2x right?

    Comment


    • #3
      I have a G400 32 SH and I also attached a small cooling fan to the stock heat sink using superglue and it works perfectly.

      Regards,
      Ed

      Comment


      • #4
        superglue eh... what if i dont want something so permanent... and did u attach it on top of the heatsink? can i just tape it hehe

        Comment


        • #5
          to the top =(

          Comment


          • #6
            ok i used sisoft and it says my agp is 1x.. i never changed it but hell how do i get it to 2x?

            Comment


            • #7
              superglue won't hold up long term, you may hear a little thump in the night when it falls off on to your soundcard or something worse! use some screws that just go into the prongs of your heatsink enough to hold but not through the chip the fan should have holes in the corners already
              jim

              ------------------
              PIII-500mhz @ 620!
              Abit BE6 mobo
              128mb pc-100
              Mill G400(YAHOO!!!) 32mb @ 120%)
              PD 5.30
              Maxtor 13.2 gb Uata66 hdd
              SB Live!
              Winblows 98se
              DX7
              THREE BIG FANS, six little ones and a case that sounds like a turbine engine...doh!


              System 1:
              AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
              Epox 8K7A
              2x256mb Micron pc-2100 DDR
              an AGP port all warmed up and ready to be stuffed full of Parhelia II+
              SBLIVE 5.1
              Maxtor 40g 7,200 @ ATA-100
              IBM 40GB 7,200 @ ATA-100
              Pinnacle DV Plus firewire
              3Com Hardware Modem
              Teac 20/10/40 burner
              Antec 350w power supply in a Colorcase 303usb Stainless

              New system: Under development

              Comment

              Working...
              X