Dell has NEW G400 DRIVERS!

[IceStorm]

Haven't actually unzipped them yet, but here's the link from VoodooExtreme:
http://support.dell.com/filelib/down...d=2260&libid=6

Anyone have any idea if these are the 10/8 drivers?




------------------
Primary System: PIII-540 (450@4.5x120), Soyo 6BA+ III, 2x128MB PC100 ECC SDRAM CAS2, G400 MAX in multi-monitor mode. V2 SLI rig. Two Mitsubishi Diamond Pro 900u monitors, 3Com 3C905, SoundBlaster Live!, DeskTop Theater DTT2500 DIGITAL Speaker System (Sweeeeeet!), 2nd Parallel Port, WD AC41800 18GB HD, WD AC310100 10GB HD, Toshiba SD-M1212 6x DVD-ROM, HP 8100i CD-RW, Epson Stylus Pro, Sharp JX-9400 LJ-II compatible, OptiUPS PowerES 650, MS SideWinder Precision Pro USB joystick, Logitech 3-button mouse, Mitsumi keyboard, Win98 SE, Belkin OmniCube 4-port KVM, 10/100 5-port Linksys Ethernet switch (30~40MB/min under Win98SE)

Secondary System: PII-266, Asus P2B BIOS 1008, 1x128MB PC100 ECC SDRAM CAS2, Millennium II, 3Com 3C590, ADSL Modem 640kbit down/90kbit up, 3Com 3C509, Mylex BT-930 SCSI card, Seagate 2GB Hawk, NEC 6x CD-ROM, Linux distro S.u.S.E. 6.1 (IP Masquerade works!)

Tertiary System: DFI G568IPC Intel 430HX chipset, P200MMX, 4x64MB EDO Parity RAM, Millennium II, Intel Pro/100+ client NIC, SoundBlaster 16 MCD, Fujitsu 3.5GB HD, WD 1.2GB HD, Creative Dxr3 DVD decoder card, Hitachi GD-2500 6x DVD-ROM, Win98 SE

All specs subject to change.

[Rags]

I wouldn't think so, they are the 5.2X drivers/ICD with quality assurance from Dell. The TurboGL, I believe is going to be available with the 5.3x drivers.

Rags

[3rdStone]

on that page it says this:

Matrox G400 MAX Windows 98 3D graphics driver v5.23.026

I think v. 5.30 is due on the 8'th

------------------
'scuse me while I kiss the sky

[IceStorm]

Ok, tried them out. Here's the deal:

1) Text file RN98X04.TXT, in the archive, has a revision date of October 10, 1999.

2) Just played HL. Texture corruption galore.

Don't bother with this one.