Tweet
G200 + Quake w/5.41 drivers
Quake used to be fine under earlier drivers
but with 5.41 I get rainbow textures
on the walls. Is there a fix?
------------------
but with 5.41 I get rainbow textures
on the walls. Is there a fix?
------------------
-
-
A lot of people prefer PD ver. 5.30 with the G200.
Also, you might want to try disabling dynamic lighting or, if your desktop is at 32-bit, knocking it down to 16-bit.
Paul
paulcs@flashcom.net -
Put "r_dynamic 0; gl_flashblend 1" in your id1/autoexec.cfg. Dynamic lighting is off, but rainbow textures are gone.
------------------
INTEL CELERON 433, G200 SD 8MB AGP (BIOS 2.6), INTEL ATLANTA 440LX moby (latestly BIOSED), SOUNDBLASTER PCI 128, 96 MB SDRAM 66Mhz, 4.3 WESTERN DIGITAL EIDE CAVIAR HD, CREATIVE 24X CD-ROM, AOC 5VLR 15", EPSON STYLUS COLOR 200.
ALWAYS the latest Powerdesk and DirectX.
Remember folks:
"Computers are useless. They can only give you answers"
Pablo Picasso
Comment
-
i agree w/paulcs
5.41 is just terrible, use 5.30 or i find 5.13 better
<font size="1">Gigabyte GA-6VXC7-4X MoBo
VIA Apollo Pro 133a (694x/686A) chipset (4x agp, UDMA 66)
Celeron II 733 CPU (coppermine 128)
128meg (2x64) 133mhz SDRam
Matrox Milleniumm G200 AGP 16 mb
Creative Sound Blaster Live! 5.1 Digital model 0100 (MP3+, Gamer)
Quantum LM 30 gig HD 7200 RPM UDMA 66
Realtek 8029A NIC Card
Optiquest V775 17" Monitor
Actima 36X CD-Rom
Advansys 510 SCSI Card (ISA, but good enuf for my burner)
Yamaha 6416 CD-RW
Windows 2000 (primary)
Slackware Linux 9.0(secondary/emergency)</font>Comment
-
I think they work really well on my system.I couldn't get Qll,HL,KingPin to work with the 5.30 drivers
------------------
Amd K6-2 350@452,Fic 503+1.2a,64mb pc100 Mushkin Samsung GH cas2,G200 8mb Sgram,Maxtor 8.4gb,Yamaha Sound
Amd K6-2 350@452,Fic 503+1.2a,64mb pc100 Mushkin Samsung GH cas2,G200 8mb Sgram,Maxtor 8.4gb,Yamaha SoundComment
Comment